Memory, bandwidth, and software constrain deployment

An original hardware worksheet should include memory capacity, bandwidth, supported precision, software compatibility, and expected utilization. Long inputs and large batches can expose different constraints from a short single-user demo.

Measure your workload instead of quoting a peak

Vendor performance claims belong to their stated workload and setup. Test your model and traffic pattern before treating a theoretical maximum as a deployment estimate.

Why peak math is not throughput

Peak operations per second assume a matrix size and a precision the model may not use. A transformer that is waiting on memory bandwidth will not hit that peak.

High-bandwidth memory and the interconnect between chips matter as soon as the model is split across devices. A bigger peak on a slide can be a slower token for your batch size.

The software stack is part of the chip. A kernel that does not exist for your framework is a chip you cannot use, however large the number.

Quantized formats need kernels too. A 4-bit model on hardware that only goes fast at 16-bit does not get the 4-bit brochure.

What to compare instead

Compare tokens per second at the batch you will serve, the memory required for the weights and the cache, and the precision you will actually run. Include the host and the network if the system is a cluster.

Vendor numbers are vendor numbers. Label them.

If you have not run the model, say you are repeating the datasheet.

What to record before you rely on it

Write the precision, the batch, the sequence length, and whether the figure is a vendor datasheet or your run. Keep the software version.

A kernel update can move the result more than a new slogan.

Keep the model id or the paper citation, the date you read it, and the inputs you used beside that note, so a later change can be compared with the same test.

When the result is a failure, store the artifact and change the design. Do not relax the check until the model happens to pass.

Name a person who owns that failure.

Common questions

Is more memory always better?

It lets a larger model or a longer cache fit. It does not tell you the token rate.

A chip with less memory and more bandwidth can be the better serving part for a model that already fits.

Do FLOPs predict quality?

No. FLOPs are a compute quantity. Quality is the model and the data.

A chip metric does not rank answers.

Sources & further reading

  1. NVIDIA: Tensor Cores ↗
How this story was made

Written by Kristian Kostov with AI assistance and checked against the linked sources. Company performance claims are attributed to the company. Analysis reflects AiLookout’s interpretation; we have not independently tested the products discussed. Cover photography is illustrative and does not depict the specific announcement or product.

Our editorial standards
Back to all stories